Supported Devices

The basic protocols for handling actions on devices in the application are SNMP and IPMI.

Servers

The application offers support for all servers with access to IPMI version 1.0, 1.5 and 2.0. Using the IPMI protocol, you can perform boot, reboot and shutdown actions.

Supported Server Providers (KVM Console):

  • AMI
  • ASRockRack
  • Ast2300
  • Ast2050
  • Dell DRAC 9
  • Dell DRAC 8
  • Dell DRAC 7
  • Dell DRAC 6
  • Dell DRAC 5
  • Dell DRAC 2
  • Dell DRAC 1
  • HP iLO 5
  • HP iLO 4
  • HP iLO 3
  • Huawei iBMC 5
  • Inspur
  • Lenovo ThinkSystem (TSM)
  • Quanta BMC
  • Supermicro

Supported Server Providers (HTML5 Console):

  • Dell iDRAC 9

Switches & Routers

EasyDCIM performs operations on the switch using the SNMP protocol. If your device is compatible with the version 1, 2 or 3 of SNMP, then it is most likely supported by the application. The following list includes only the switches tested by our customers. The device can be supported by EasyDCIM even if not listed below.

  • Cisco Catalyst 4948 10GE
  • Juniper EX2200 (with SNMP access)
  • Cisco SF300
  • Extreme Networks Summit X450a
  • Juniper EX3300 (with SNMP access)
  • Cisco SF200
  • HP 3800-24G-2SFP+
  • MikroTik Cloud Core Router CCR1072-1G-8S+
  • HP 1920-48G
  • Juniper EX4200 (with SNMP access)
  • Cisco Catalyst 3560-48TS-S
  • Dell PowerConnect 2716
  • Dell PowerConnect 2848
  • Dell PowerConnect N3048
  • MikroTik Cloud Core Router CCR1009-8G-1S-1S+
  • Cisco Catalyst 2960G-48TC-L
  • Cisco Catalyst 3550-12T
  • Cisco Catalyst 4500
  • MikroTik Cloud Core Router CCR1036-8G-2S+EM
  • Cisco SG500X-24
  • Cisco SG350XG-24F-K9-EU
  • HP V1910-48G
  • HP 1810-24G
  • HP ProCurve 2910al
  • HP ProCurve Switch 2848
  • Juniper QFX3500 (with SNMP access)
  • NETGEAR GS724T ProSafe

Manage Switches & Routers

EasyDCIM supports operations on switches with the use of appropriate protocols. These protocols depend on the operating system that is installed on the network device. Currently, EasyDCIM supports network devices based on the following operating systems:

Operating System Protocol Supported Functions
JUNOS 12.3R12-S12 NETCONF VLANs Management, Enable/Disable Network Port
Arista eAPI VLANs Management, Enable/Disable Network Port, Change Port Speed
HPE Comware Software NETCONF VLANs Management, Enable/Disable Network Port
Cisco Nexus NxAPI VLANs Management, Enable/Disable Network Port


If you have a network device that is not on this list, all you need to do is share it with us for a few days so that we can prepare a suitable driver for you.

PDU Devices

EasyDCIM performs operations on PDU devices using the SNMP protocol. Currently, the platform offers support for the majority of products under such brands as: APC, Raritan, CyberPower and Enlogic. The support covers basic power outlets management, that is “outletOn”, “outletOff” and “outletReboot” actions. Moreover, the information on the total power consumption is collected for the entire PDU device.

Supported PDU Device Manufacturers:

  • APC
  • Aten PDU
  • CyberPower
  • Dell rPDU
  • E3Meter
  • Enlogic
  • Panduit
  • PowerAlert
  • Raritan
  • Sentry Switched PDU
  • SmartPDU
  • Switched PDU